Marine

Liquids-

Soft Soap – paste: 02 SS
A thick and heavy paste soap used for cleaning boat decks, pots, garbage cans or any items requiring the use of a paste detergent.

Tee Pol I and Tee Pol II Cleaners: 02 TP
For use on boats for general cleaning in the galley. engine room, on floors, painted woodwork or as a deckwash. A fine all purpose cleaner.

A.P.R. Rig Wash: 08 RW
An all-purpose, heavy duty rig wash is designed to quickly clean those soils commonly found on offshore and inland drilling rigs. Effective in hot and cold water, it works like a degreaser to penetrate and break up greases and oils for easy rinse. It works like a solvent, yet without the hazards normally associated with solvent cleaners. Non-flammable and safe for use on all surfaces not harmed by water.

Essential Soap Scrub Powder: 08 SP
This concentrated scrub powder was formulated for efficient cleaning at a low, economical cost. General cleaning uses: boats, oil rigs, trucks, trailers, machine shops, shipyards, floors and walls, engine rooms and machinery.

Marine Aluminum Brightner
Clean, brighten, and strip stains from aluminum and fiberglass using this cleaner and brightener. Marine Aluminum Brightener is a blend of hydrofluoric acid, phosphoric acid, and stable wetting agents. Apply to surface with microfiber cloth or scrubbing brush. Personal Protective Equipment is required.Marine Aluminum Brightener is best used as a heavy-duty or restorative cleaner. Applications include boat hulls, aluminum trailer bodies, and other similar aluminum or fiberglass surfaces.
This product is classified as a Hazardous Material, and additional shipping fees may be applied* Hydrofluoric acid is a solution of hydrogen fluoride and water. Hydrogen fluoride is a colorless liquid that can be made by the action of sulphuric acid on calcium fluoride. It is an extremely corrosive fluorinating agent which attacks glass. Fluoride is a halogen and a good oxidizing agent, reacting with metal to create ionic halide salts. This product also contains phosphoric acid; created by heating phosphonic acid, a colorless to pale-yellow deliquescent crystalline solid. Phosphonic acid is dibasic and has moderate reducing properties.Marine Aluminum Brightener is a ready-to-use rust converter. It has been premixed in exacting proportions during manufacturing, so you never have to measure or mix, or risk using a solution that’s too strong to be safe or too weak to be effective. Ready-to-use products allow you to use the exact amount you need, thereby minimizing waste. Phosphate free.

Endall Rust
Convert rust into a non-corrosive material with this rust converter. Endall Rust creates a black, protective polymer coating through natural chemical reaction. After only two coats, the altered surface is stable enough to accept oil-based paints. Remove loose rust particles with a wire brush and cloth. Then apply rust converter with either a paint brush or roller (depending upon the size of the object or surface area.) Allow product to cure for 48-hours before painting. Unused product can be stored for up to one year. Personal Protective Equipment is recommended. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. This product contains tannic acid which reacts with rust to create iron tannate–a black substance that resists corrosion, allowing iron and steel to be painted with oil or epoxy-based paints. Endall Rust is a ready-to-use rust converter. It has been premixed in exacting proportions during manufacturing, so you never have to measure or mix, or risk using a solution that’s too strong to be safe or too weak to be effective. Ready-to-use products allow you to use the exact amount you need, thereby minimizing waste. Phosphate free.

Sea Suds – All Purpose Detergent: 08 SS
An economical, low-sudsing detergent for use in laundry or for general cleaning of boats, oil rigs, dredges, trucks, trailers, machine shops, etc.

Sodium Metabisulfite : 19 TCSBS50
Also known as shrimp powder. Use with water as a dip for prevention of black spots on shrimp. DO NOT USE IN DRY FORM. Use solution not exceeding a strength of 1.25% (3.25 lbs. of powder dissolved in 30 pals. of cool to warm water is required to make up 1.25% solution) Use as a dip only and drain shrimp well.

Oil Absorbent Booms (AS G510)
Contain or dam large spills, or still flowing liquids, using these snag resistant booms. They are designed to absorb oil, gasoline, grease, syrup, acid, solvents, and hazardous waste; floating indefinitely when fully saturated. These items are typically linked together or placed at the base of doorways to prevent seepage. Surround or barricade the desired area and allow product to absorb fluid. Dispose of used product in compliance with all local and national regulations. Personal Protective Equipment is recommended. This item is tailored for use in shipyards, warehouses, canning plants, packaging plants, textile mills, garages, repair shops, and bus barns. Store in a dry area.
Availability:
4 booms per bail
20 bails per pallet

Oil Absorbent Roll (*LR 144-38)
Remove difficult to clean substances using this economical, absorbent roll. It is designed to absorb petroleum based liquids including oil, gasoline, and grease. This cost saving roll can be cut to desired size and takes up
less space than a comparable amount of conventional pads. Place custom length pad over or around the desired area and allow product to absorb fluid. Wipe and repeat as needed. Dispose of used product in compliance with all local and national regulations. Absorbent pads are great for cleaning equipment, engines, machines, and presses. Personal Protective Equipment is recommended. This item is tailored for use in shipyards, warehouses, canning plants, packaging plants, textile mills, garages, repair shops, and bus barns. Store in a dry area.
Roll specifications:
144′ x 38″
Availability:
1 roll per bale
20 rolls/bales per pallet

Oil Only Absorbent Pads ( CEP L100-E)
Remove difficult to clean substances using these economical, hydrocarbon specific pads. Made with polypropylene fibers, these fast-wicking pads are designed to absorb petroleum based liquids including oil, gasoline, and grease. Place a pad over or around the desired area and allow product to absorb fluid. Wipe and repeat as needed. Dispose of used product in compliance with all local and national regulations. Absorbent pads are great for cleaning equipment, engines, machines, and presses. Personal Protective Equipment is recommended.This item is tailored for use in shipyards, warehouses, canning plants, packaging plants, textile mills, garages, repair shops, and bus barns. Store in a dry area.
Pad specifications:
15″ x 17″ | 1.36oz
Availability:
100/1 bale
(Note: Order 70 bales for full pallet quantities.)